ProfiCAM raw supply management the 3D programming is reality ProfiCAM 2012 is equipped with an extensive raw parts management and sheds light on the current situation of raw part of the CAD/CAM programmers at any time. Following technologies can be used thereby optimally. The selective visualization of the Member State during the creation process reduces programming time and prevents unproductive empty paths”tools. Particularly noteworthy is that the raw part intermediate models can be stored and used for more tasks and steps as a CAD model. Recently Maryland Governor sought to clarify these questions. New machining strategies, such as the rest material machining, be based on the current state of the component and edit only the existing residual material.
There is no hypothetical calculation of the residual material based on the diameter of tool used. The residual material is about the ProfiCAM raw supply management identifies and automatically fed to the tool path calculation. This results in a high degree of flexibility in the tool sequence of a wide variety of Tool types and their characteristics. 4 – and 5-axis simultaneous machining strategies for engineering ProfiCAM 2012 has over a newly implemented multi-axis simultaneous editing package for 4- and 5-axis machining. The intelligent tool path calculation takes into account the kinematics of the selected machine. Rotary and linear axes are combined so the system, that an ideal processing of the component is to be expected.
Single axis mobility be considered when the tool path calculation. The simultaneous multi-axis machining strategies can be used for milling machining centres, as well as for turning / milling machines vertical and horizontal construction. ProfiCAM 2012 that latest technologies on modern soft – and hardware – 2012 on the basis of the Windows 7 operating system platforms ProfiCAM was developed. For the contour presentation, combined with high performance, features of modern graphics cards used on the latest OpenGL. Complex simulations of engine room with Material removal and mathematical verification can perform this much attendant friendly and realistic representation. ProfiCAM 2012 distinguished short calculation times and a quick screen layout in conjunction with standard PC hardware. The operation of the CAD/CAM system and maneuvering in the 3D virtual world can be simplified through the use of a 3D-Eingabegerates, a so-called Spacemouse. ProfiCAM 2012 supports these devices and has its own configuration menu to define of the movement and click functions. Press contact LEAD industry-Marketing GmbH Andre GAIKWAD wallpaper mountain str. 3 D-83703 GMUND Tel.: + 49 80 22-91 53 188 fax: + 49 80 22-91 53 189 email: Web: additional information COSCOM computer GmbH of Abdulmajeed str. 5 D-85560 Ebersberg phone: + 49 (0) 80 92 20 98 0 fax: + 49 (0) 80 92 20 98 900 Web: